Teac GigaPulse - Manual (Page 92)

92
GigaPulse
™
User Guide
Gig
aP
uls
e-P
ro
Sig
na
l F
lo
w
GigaPulse-Pro Signal Flow
92
As you play, you will notice that the levels
on mixer channels 5,6 are now lighting up.
This is because we enabled the surround
microphones and assigned them to mixer
channels 5 & 6 in the Mic to Mixer Routing.
The outputs to which they are assigned are
the ones that will be used in the mixer.
Try assigning the surround microphones to
channels 3 & 4 instead.
Now the levels on 3,4 are lighting up instead.