Simple mail transfer protocol (smtp), Simple mail transfer protocol (smtp) -77 – Verilink T1 Access Router (34-00327) Product Manual User Manual
Page 105
W e b S e r v e r I n t e r f a c e
3-77
Simple Mail Transfer Protocol (SMTP)
Use the SMTP Details Screen (Figure 3.77) to configure the SMTP function
of the T1 Access Router. SMTP is used to forward notification of events to a
user-definable list of up to five recipients. The even notification is sent as an
e-mail in the following format:
From: T1 Access [email protected]
To: Event Receiver
Subject: Even Notification
IP Address: 192.168.60.157
System Up Time: 0 days, 01:20:02
System Name:
System Location:
System Contact:
Reporting the following event:
OOFS Threshold Exceeded, ifIndex 3, Count 5
The parameters associated with the SMTP Details screen are described below.
Figure 3.77
SMTP Details Screen
Mail Server IP Address
IP address of the mail server to which notifications will be sent.
Domain Name
Name of domain where the device resides (i.e., Verilink.com)
Mail From
E-mail address of the device (T1 Access Router). While the device will not be
able to retrieve e-mail from a service, the mail needs to have the “From”
address filled in.
NOTICE:
There can be no blank space(s) in the “Mail From” address.
Recipient 1...5
E-mail addresses of recipients of event notifications (i.e., [email protected]
or [email protected]).