Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 123)

V T 1 0 0 I n t e r f a c e 4-15
Services
The Service Table screen (Figure 4.14) provides a view of the unit’s defined
services and displays the Interface, Type, and Pair parameters for each
service.
Figure 4.14 Service Table Screen
The Service Table screen displays the available services listed by Index
number. From the Service Table screen, you can navigate to a Service Details
screen (Figure 4.15) from the <Index> column, to an Interface Details screen
from the <Interface> column, or to a Type Details screen from the <Type>
column. To add a service, select the “Add Service prompt at the top of the
screen.
Figure 4.15 Service Details Screen
From this screen, you can access and change the parameters listed below. The
new parameters are saved when you press the “Esc” key and return to the
previous screen.