Log out, In-band management, Log out -80 in-band management -80 – Verilink T1 Access Router (34-00327) Product Manual User Manual
Page 108
3-80
T 1 A c c e s s R o u t e r
NOTICE:
Remember that passwords are case-sensitive. When logging on,
password must be entered exactly as it was programmed.
Log Out
The Log Out screen (Figure 3.80) is used to log the current user off of the
Web Server. The Log Out function is only available after user password
protection has been set. You will be logged out of the system automatically
1 hour after you user log on using a password to gain access; after this, you
will be required to enter the password to gain write access.
Figure 3.80
Log Out Screen
In-band Management
There are two ways to implement remote in-band management of a T1 Access
Router unit. The first is to use the local router to route management frames
(Web browser or SNMP) between the local LAN and the remote unit. The
second is to use the local T1 Access Router unit as an independent gateway.