Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 125)

V T 1 0 0 I n t e r f a c e 4-17
The Channel Table Details screen lets you establish the Rate, Service, and
Idle Pattern parameters for any available channel. The screen parameters are
described below.
Rate The unit can operate at any data rate that is a multiple of 56 or 64 kbps.
Values: 56K, 64K
Default: 64K
Service Specifies the service to which this channel is allocated. Refer to the Service
Table to see how the current services are configured.
Idle Pattern Selects the DS0 idle pattern sent by the unit and lets the unit determine if the
DS0 idle pattern has been sent by the other end.
Values: 0
−
255
Default: 127
Frame Relay Service Details Screen
Access the Frame Relay Service Details screen (Figure 4.17) by selecting
“Frame Relay” under the <Type> column on the Service Table screen.
Figure 4.17 Frame Relay Service Details Screen
The Frame Relay Service Details screen displays Service, Pair, and Interface
details across the top of the screen. Fields shown at the top of the Frame
Relay Service Details screen are described below.
Field Description
Active Read-only status (No, Yes)
LMI Type Read-only status
FrameStart Status Read-only status