Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 191)

S p e c i f i c a t i o n s A-5
Connector Pin Assignments
Ethernet Connection Pin Assignments
The 10/100 ETHERNET interface is an 8-pin modular jack that complies with
standard twisted-pair, 10Base-T requirements.
Network Interface Pin Assignments
The NET 1 physical interface is a standard RJ-48C, 8 -pin modular jack. The
following table displays the pinout assignments.
Supervisory Port Pin Assignments
The SUPERVISORY PORT interface is a standard DB-9, 9-pin modular jack.
The following table displays the pinout assignments.
Pin Ethernet Interface
1 Data Out (+)
2 Data Out (-)
3 Data In (+)
6 Data In (-)
Pin T1 NET Interface
1 Data In
2 Data In
3, 6 Not used
4 Data Out
5 Data Out
7, 8 Chassis Ground
Pin DCE Mode DTE Mode
1 DCD out LL out
2 Rx Data out Tx Data out
3 Tx Data in Rx Data in
4 DTR in DSR in
5 Signal Ground Signal Ground
6 DSR out DTR out
7 RTS in CTS in
8 CTS out RTS out
9 No connect No connect