Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 96)

3-68 T 1 A c c e s s R o u t e r
The NAT Port Details screen provides the following user-activated buttons:
The NAT Port Status Table (Figure 3.64) displays for each port the processed
packets from specific IP addresses.
Figure 3.64 NAT Port Status Table Screen
IP Address Original IP Address of the host.
NAT IP Address Translated IP Address of the host.
Processed Packets Number of packets processed by NAT for this address.
Dynamic Host Configuration Protocol (DHCP)
DHCP provides a mechanism through which computers using TCP/IP can
obtain protocol configuration parameters automatically through the network.
The most important configuration parameter associated with DHCP is the IP
address. A computer must initially be assigned a specific IP address that is
appropriate to the network to which the computer is attached, and that is not
assigned to any other computer on that network. If a computer moves to a
new network, it must be assigned a new IP address for that new network.
DHCP can be used to manage these assignments automatically.
DHCP has other important configuration parameters also, such as the subnet
mask, default router, and Domain Name System (DNS) server. Using DHCP,
a network administrator can avoid “hands-on” configuration of individual
computers through complex and confusing setup applications. Instead, those
computers can obtain all required configuration parameters automatically,
without manual intervention, from a centrally managed DHCP server. DHCP
is available on the 10/100 Ethernet port only.
NOTICE: You must Save and Restart for any changes in DHCP configuration
parameters to take effect.
Button Function
Submit Sets any values that have been changed.
NAT Details Returns the user to the NAT Details screen.
NAT Port Table Returns the user to the NAT Port Table screen.
Delete NAT Port Deletes the specified NAT Port.
NAT Port Status Displays the NAT Port Status Table screen.