Appendix a specifications, Network interface, Ip gateway – Verilink T1 Access Router (34-00327) Product Manual User Manual
Page 187: 10/100 ethernet (ip gateway or management), Management interfaces, 10/100 ethernet (management or ip gateway), Appendix a, "specifications, Pecifications
S p e c i f i c a t i o n s
A-1
A
P P E N D I X
A
A
PPENDIX
A
S
PECIFICATIONS
Network Interface
Line Rate:
1.544 Mbps (
±
50 bps)
Line Framing:
D4 or ESF
Line Code:
AMI or B8ZS
Input Signal:
DS1, +1 to
−
27 dB (ALBO)
Connection:
RJ-48C jack, 100
Ω
(
±
5%)
Output Signal:
3.0 V (
±
10%) base - peak into 100
Ω
with protection
Mode:
Long-haul, Short-haul
DSX-1 Level:
0-110, 111-220, 221-330, 331-440, 441-550, 551-660,
>661 ft
Line Build Out:
0,
−
7.5,
−
15,
−
22.5 dB attenuation
Transient Voltage:
1000 V protection, fused input / output
Jitter Control:
per TR 62411 and T1.403
Timing Source:
Internal, Network
Ones Density:
B8ZS, N x 56 bit stuffing, alternate fill; complies with TR
62411
IP Gateway
10/100 Ethernet (IP Gateway or Management)
Protocols:
RIP1, RIP2, OSPF
Connection:
8-pin modular
Network Protocol:
TCP /IP based networks
Data Rate:
10/100 Mbps
Compatibility:
10/100Base-T
Management Interfaces
10/100 Ethernet (Management or IP Gateway)
Connection:
8-pin modular