Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 168)

4-60 T 1 A c c e s s R o u t e r
screen lists the Index number, Endpoint name, TCP Local Port number, and
whether or not this entry is enabled.
Figure 4.54 TCP Connection Details Screen
Select the TCP Connection Table prompt on the TCP Server screen to access
the screen shown in Figure 4.55. This screen lets you see which addresses and
ports are in a “listening” state and which are already established.
Figure 4.55 TCP Connection Table Screen
Select the “TCP Host Access Table” prompt on the TCP Server screen to
access a screen (Figure 4.56) where you can specify up to 10 IP addresses that
may access the services provided by TCP Server. If no addresses are
provided, any host can access the services provided by TCP Server.