Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 54)

3-26 T 1 A c c e s s R o u t e r
PPP Statistics
Clicking the “PPP Statistics” button brings up a table (Figure 3.18) that reports
on traffic.
Figure 3.20 PPP Statistics Screen
MRU (Maximum
Receive Units) Informs the peer that the implementation can receive larger
packets, or to request that the peer send smaller packets.
Default = Yes
HDLC Address
Compression Provides a method to negotiate the compression of high-level
data link control (HDLC) addresses.
Default = Yes
IP Address Dynamically negotiates for IP addresses; otherwise, it is
assumed both sides know each other’s IP addresses.
Default = Yes
ACCM Negotiates the use of control character transparency on
asynchronous links.
Default = Yes
Magic Number Unique numbers useful for detecting loopbacks.
Default = Yes
PAP (Password
Authentication
Protocol) An authentication scheme used by PPP servers to validate the
identity of the originator of the connection.
Default = No
CHAP (Challenge-
Handshake
Authentication
Protocol) An authentication scheme used by PPP servers to validate the
identity of the originator of the connection upon connection or
any time later.
Default = No
Parameter Description