Simple mail transfer protocol (smtp), Simple mail transfer protocol (smtp) -76 – Verilink T1 Access Router (34-00327) Product Manual User Manual
Page 184

4-76
T 1 A c c e s s R o u t e r
Figure 4.74
Bridge Lookup Table
Address
MAC Address learned and included in the forwarding table.
Port
Port where the MAC Address was learned.
Status
How the address was included in the forwarding table. (Currently, only
“learned” will appear.)
Simple Mail Transfer Protocol (SMTP)
Use the SMTP Details Screen (Figure 4.76) to configure the SMTP function
of the WANsuite 6450. SMTP is used to forward notification of events to a
user-definable list of up to five recipients. The even notification is sent as an
e-mail in the following format:
From: [email protected]
To: Event Receiver
Subject: Even Notification
IP Address: 192.168.60.157
System Up Time: 0 days, 01:20:02
System Name:
System Location:
System Contact:
Reporting the following event:
OOFS Threshold Exceeded, ifIndex 3, Count 5
The parameters associated with the SMTP Details screen are described below.