Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 52)

3-24 T 1 A c c e s s R o u t e r
Figure 3.19 PPP Service Details Screen
ACCM The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–4294967295
Default: 4294967295
MRU The Maximum Receive Units configuration option may be set to inform the
peer that the implementation can receive larger packets, or to request that the
peer send smaller packets.
Values: 128–4096
Default: 1500
Port IP Address The IP Address of the port. For unnumbered PPP link, set to 0.0.0.0 and set
IP Address Negotiation to “No.”
Default: 192.168.1.2
Peer IP Address The IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Virtual PPP over Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the periodic authentication challenge.
Values: 0
−
3600
Default: 0 (disabled)