Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 114)

4-6 T 1 A c c e s s R o u t e r
Figure 4.5 Confirmation Screen
NOTICE: Performing a “Maintenance Reset” or a “Save and Restart” will
terminate communications with the unit. Refresh (by pressing
“Ctrl+U”) after approximately 10 seconds to restore communications.
Save and Restart
Selecting “Save and Restart” will display a confirmation menu similar to that
shown in Figure 4.5. Select “yes” to save current configuration settings.
Interfaces
The T1 Access Router’s Interfaces screen in Figure 4.6 lists all the unit’s
available interfaces.
Figure 4.6 Interfaces Screen