SMA Sunny Boy Control Light User Manual
Page 13
Sunny Boy Control Light
Chapter 1: Introduction
SUNBCL-11:NE
- 13 -
SMA Regelsysteme GmbH
Edit mode
The edit mode enables modifications of specific settings or operation parameters.
You may activate the editing mode of the respective parameter (see selection arrow
above) if you select it with the arrow keys and press the [Enter] key.
The edit mode will only be started if it is actually possible to modify the parameter. In
that case the parameter begins to blink and you can make changes with both arrows
[[[[↑↑↑↑]]]]
and
[[[[↓↓↓↓]]]]
. Changing numerical values can be accelerated by holding the arrow key
down. The longer you press the arrow key the bigger steps are used to change the
value.
•
[Enter] accepts and saves your current settings.
•
[ESC] cancels the current modification.
•
If a parameter was changed in the "Edit" mode, the selection arrow blinks until
confirmed once more with the [Enter] key or is cancelled with the [ESC] key.
•
If no further key is pressed the new setting will be automatically cancelled after
60 sec.