Ext. display, Interface, Com2:pc – SMA Sunny Boy Control Light User Manual
Page 45: Type, Energiecom, Configure, Display-no, Display 01, Sc:e-total, Display 03
Sunny Boy Control Light
Chapter 5: Menu Functions for Configuration
SUNBCL-11:NE
- 45 -
SMA Regelsysteme GmbH
[ EXT. DISPLAY ]
Interface
COM2:PC
Type
EnergieCom
----------------
configure
Fig. 5.14: External display “EnergieCom”
Configuration
The line selected with the cursor additionally shows the selected device and the
measured channels. Dot on the left indicates if the display is activated or not (dot =
selected; no dot = not selected).
[ DISPLAY-NO. ]
¯Display 01
¯SC:E-Total
¯Display 03
¯Display 04
¯Display 05
¯Display 06
Display 07
Display 99
Fig. 5.15: Overview of the 99 possible displays
[ENTER] confirms the selection and displays an overview of the defined parameters.
Overview of the defined parameters
This sub-menu shows all settings of the selected display.
[ DISAPLAY 06 ]
Dev.:Channel
SC:E-today
Format 06.2
Fig. 5.16: Display settings
The numeric format can be edited in the bottom line.