SMA Sunny Boy Control Light - Manual (Page 68)

Sunny Boy Control Light Chapter 6: PC and Sunny Data Control
SUNBCL-11:NE
- 68 -
SMA Regelsysteme GmbH
Parameter Entry Description
MO_Modem-Init1 * AT&FE0V1X0Q0L2M1 Modem initialization sequence
MO_Modem-Init2 * ATS0=1 Modem initialization sequence
MO_Modem-Init3 * AT&H0&D0&W Modem initialization sequence
MO_Type * Hayes Used Modem type
PL_AddDevice * 0 Adds device with certain number
PL_Auto-Install * Deactivated Activated: Autom. search for devices
PL_DelDevice * 0 Deletes device with certain number
PL_Energy_Offs * 0,00 kWh Energy-offset value for E-Total display
SY_Gatewaymode * automatic Transmission Packet handling
SY_Idle Mode Activated Energy saving mode
activated/deactivated
SY_Language Deutsch Language English, French, German
SY_Memory Function --- Reset / store parameter
SY_Service Function * --- Delete stored values of daily yield /
Channel info / operating data / online-
Info and Reset System
TO_Communication 50.00 % Threshold for communication failure
TO_Energy 50.00 % Tolerance of energy yield monitoring
TO_Offline 30.00 min Threshold for offline time of device
TO_Warnings 15.00 min Threshold for message generation
Fig. 6.2: List of parameters, * only available with installer password