SMA Sunny Boy Control Light - Manual (Page 88)

Sunny Boy Control Light Chapter 7: Appendix
SUNBCL-11:NE
- 88 -
SMA Regelsysteme GmbH
7.5 AT-Commands
The commands described in the following table are used for initializing the modem.
The init-strings can be modified according to your specific modem type.
Description Microlink
33.6TQV
Microlink
56k
Zyxel /
Hayes
Standard
Load factory settings &F &F &F
Disable character echo in command state E0 E0 E0
Display result code in verbose form V1 V1 V1
Ignore dial tone / busy tone X1 X1 X1
Return result code Q0 Q0 Q0
Speaker on level 2 L2 L2 L2
Speaker always on M1 M1 M1
Automatic answer after 1 ring S0=1 S0=1 S0=1
Flow control disabled \Q0 +IFC=0,0 &H0
Ring indication and answer possible with DTR=OFF
Automatic re-synchronization on
V.100 speed adaptation on,
Word length in async. direct mode 10 bit/char
S28=198
√
√
√
√
S28=128
√
-
-
-
Ignore DTR, assume DTR always on &D0 &D0 &D0
Automatic re-synchronization on - %E1
Save current settings as user profile 0 &W &W &W
Fig. 7.21: AT commands