SMA Sunny Boy Control Light - Manual (Page 15)

Sunny Boy Control Light Chapter 2: Commissioning the Sunny Boy Control Light
SUNBCL-11:NE
- 15 -
SMA Regelsysteme GmbH
The initialization phase is finished after 15 sec and the Sunny Boy Control Light
shows the serial number and the software version number for 30 sec. After pressing
any key you may start the configuration procedure.
[ SUNNY BOY ]
[CONTROL LIGHT ]
SerNr xxxxxxxxx
Software V2.xx
Fig. 2.2: Initial Message of the Sunny Boy Control Light
2.2 Plug & Play Setup
During the initial installation the Sunny Boy Control Light automatically starts the
Plug & Play setup with the following message:
[ SUNNY BOY ]
[CONTROL LIGHT ]
PLUG&PLAY
SETUP
Fig. 2.3: Starting Display of the Plug & Play Setup
All settings necessary for the initial installation (language, date/time and device
registration) will be displayed one after the other. Confirm the following configuration
steps one after the other. During the Plug & Play setup you may return to the start
message by pressing the key combination
[[[[↑↑↑↑]]]]
+
[[[[↓↓↓↓]]]]
and restart the initial installation
any time.
2.2.1 Language Selection
The Sunny Boy Control Light supports several languages.
[ LANGUAGE ]
deutsch
ˆ english
francais
Fig. 2.4: Language selection