SMA Sunny Boy Control Light - Manual (Page 49)

Sunny Boy Control Light Chapter 5: Menu Functions for Configuration
SUNBCL-11:NE
- 49 -
SMA Regelsysteme GmbH
DATALITE
The Sunny Boy Control Light supports DATALITE DX systems with 8 lines and 16
columns. The display is activated by selecting the interface. After you select
DATALITE the Sunny Boy Control Light displays the following:
[ EXT. DISPLAY ]
‡Interface
COM2:PC
ß Activation by selecting an interface
Type Š
DATALITE
ß Display-type
----------------
„configure
ß Menu ‘Set time’ (only with type DATALITE!)
Fig. 5.21: External display ‘DATALITE’
The internal date and time of the DATALITE display can be adjusted with the Sunny
Boy Control Light - e.g. for daylight saving time adjustment.
The internal time of the DATALITE display is adjusted as follows:
•
Connect the DATALITE display to the serial port of the Sunny Boy Control
Light
•
Activate the serial port
•
Select “configure” and press [ENTER] – The Sunny Boy Control Light
displays ‘
O.K. O.K. O.K. O.K.
’.
[ DATALITE ]
ˆTime Set
O.K.
ß appears if information has been sent
Fig. 5.22: Adjusting internal time
The internal time of the DATALITE display is then synchronized with the internal time
of the Sunny Boy Control Light. [ESC] brings you back to the upper level menues.
The internal clock of the DATALITE display keeps running even when