SMA Sunny Boy Control Light - Manual (Page 52)

Sunny Boy Control Light Chapter 5: Menu Functions for Configuration
SUNBCL-11:NE
- 52 -
SMA Regelsysteme GmbH
5.4 PV-Plant - Setup
[ PV-Plant ]
ˆ„Registration
Chap.5.4.1
„Detection
Chap.5.4.2
„Parameter Š
Chap.5.3
----------------
E-Offset
see below.
100Wh
Fig. 5.24: "PV-Plant" - SETUP
Energy - Offset
E-Offset
is used to define a difference between the display of your energy counter
and the displayed value "E-total": This value is added to the value the Sunny Boy
Control Light computes.
5.4.1 Registration
The device registration displays all detected devices with the device ID and the
device type.
[REGISTRATION ]
ˆ„SC SBCL-001
ß device ID, device-type - serial no
„A1 WR700-08
„A2 WR700-08
Fig. 5.25: "Registration" - PV-Plant
Select a device and press [Enter] in order to get detailed information consisting of
device ID, device type and network address of the device.
[ WR700-08 ]
[device type]
‡S/N 09401478
ß serial no. of Device
ID A2
ß device ID
Net 00/00/016
ß (bus address / string address / device address)
Fig. 5.26: Device ID and network address
Every device has an unique net address for identification within the network.