Working with the sunny boy control light, Display on power-up, 4 working with the sunny boy control light – SMA Sunny Boy Control Light User Manual
Page 29: 1 display on power-up, Sunny boy, Control light, Software v2.xx, Date/time, Hh:mm
Sunny Boy Control Light
Chapter 4: Working with the Sunny Boy Control Light
SUNBCL-11:NE
- 29 -
SMA Regelsysteme GmbH
4 Working with the Sunny Boy Control Light
4.1 Display on Power-Up
The Sunny Boy Control Light executes an automatic self-test at every start. On
error during this self-test, the according error or failure is indicated and - according to
system settings - an external signal is sent out or the beeper is activated. If no errors
are detected, the Sunny Boy Control Light will simply display its serial number and
software version.
[ SUNNY BOY ]
[CONTROL LIGHT ]
SerNo xxxxxxxxxx
Software V2.xx
Fig. 4.1: Display on Power-Up
After this you have to input the date and time.
[ DATE/TIME ]
MM.DD.YYYY
hh:mm
Fig. 4.2: Date/Time settings
After completing the settings the Sunny Boy Control Light switches into Normal
Mode and starts
""""Online-Info
Online-Info
Online-Info
Online-Info""""
.