Technical requirements, 1 technical requirements – SMA Sunny Boy Control Light User Manual
Page 9
Sunny Boy Control Light
Chapter 1: Introduction
SUNBCL-11:NE
- 9 -
SMA Regelsysteme GmbH
1.1 Technical Requirements
Necessary for the usage of the Sunny Boy Control Light:
•
an electricity socket
•
grid voltage and frequency must lie within the specified range
(90..260 V, 50/60 Hz)
•
for Powerline communication, all devices must be equipped with a Powerline
modem
The parallel operation of the Powerline communication with a Sunny Boy
Control Light and other devices that also use the mains for data
transmission and do not comply to the standardized transmission protocol
(e.g.: baby phone) is normally not possible.
For the operation of the Sunny Boy Control Light it is necessary that
following safety measures are kept to:
1. The power supply socket must be equipped with a Protective Earth.
2. The grid plug must be accessible at any time.
Use the Sunny Boy Control Light only in dry and dust free environments!