Yaskawa DriveWizard Plus - Manual (Page 153)

153
Motor 2 ・Resistance
Between Lines
・
Parameter
Calculations
・ Resistance
Between Lines
・
Parameter
Calculations
・ Rotational
・ Stationary1
・ Resistance
Between Lines
・
Stationary2
・ Parameter
Calculations
・
Stationary3
Selection not
possible. ・ Rotational
・ Stationary1
・ Resistance
Between Lines
・
Stationary2
・ Inertia
・ ASR Gain
・ Parameter
Calculations
・
Stationary3
Selection
not possible. Selection
not possible. Selection not
possible.
3) Select the motor for Auto-Tuning.
Select the motor for Auto-Tuning with the drop-down menu. Auto-Tuning can be performed on the
motors listed.
Once the type of Auto-Tuning and the motor have been selected, click “Next” to start the Auto-
Tuning process.
If you decide not to perform Auto-Tuning at this time, click “Cancel”.