Yaskawa DriveWizard Plus - Manual (Page 66)

66
Changing the Settings for the Drive kVA Selection or Initialization
Changing the Drive kVA setting or entering a value into the Initialization parameter will initialize the drive.
Most parameters in the drive will be reset to the default values for the kVA setting that was selected, or
according to the type of initialization that was entered.
Attempting to change any settings to the Drive kVA setting or initialization parameter will generate the
following message. The same will happen by clicking
.
Clicking “OK” will display with the following message:
Either select the type of initialization from the drop-down menu or enter the value manually.
Next, either select “Current Setting Value” from the drop-down menu that appears below, or enter the
value manually. Clicking “OK” will generate the following window:
NOTE: The lower drop-down list is enabled only when editing the drive kVA setting. The lower
drop-down list is enabled only when selecting the type of initialization to perform on the drive
settings.