Yaskawa DriveWizard Plus - Manual (Page 171)

171
When performing a Manual Operation, the following conditions are required:
• The drive must be in REMOTE mode, either set by the digital operator or by one of the input
terminals
• No faults occur
• The drive is not currently running the motor (i.e., a Run command is not present)
Follow the procedure below to perform a Manual Operation:
1) Display the Manual Operation window.
There are three ways to call up the Manual Operation window:
• View (V) in the Main Menu
View (V) Æ “Manual Operation”
• toolbar
Click
• Function Tree
Open “Test Run” and double-click on “Manual Run”