Yaskawa YASNAC PC NC I/O Signal Function Manual - Manual (Page 13)

1 - 6
YASNAC PCNC I/O Signal Function Manual Chapter 1: Feed Function
Feedrate Override Input Signal Table (continued)
Note: The status of signals is indicated by “0” or “1”.
0: Open
1: Closed
IMPORTANT!
Feedrate override value of 200% and greater is optional.
(2) Feedrate Override Cancel Input Signal
The feedrate override cancel input signal fixs the override value at “100%”.
If the “OVC” inut signal is “closed”, cutting feed designated in a part program is
executed at the feedrate specified in the program, regardless of the status of the
feedrate override input signals.
OV1 OV2 OV4 OV8 OV16
Feedrate Override
(Automatic Mode)
0 0 1 1 1 420%
1 0 1 1 1 460%
0 1 1 1 1 500%
1 1 1 1 1 540%