Document Outline

• LP200S-GB.pdf
  • 1 Introduction
    • 1.1 Welcome
    • 1.2 Roadmap of this manual
      • Where to find what in this User’s Manual
      • Brief explanation of special type styles and method of presentation
    • 1.3 Working safely with your laser printer
      • Notes on your safety and operating safety
      • Laser safety
      • Internal laser radiation
      • Safety label
      • Laser caution label
      • Ozone emission
  • 2 Unpacking, installing and setting up the printer
    • 2.1 Unpacking your laser printer
    • 2.2 Overview of the printer
      • External features
      • Inside the printer
      • Optional accessories
      • Printer control panel
    • 2.3 Installing your laser printer
      • Place of installation
      • Storage of consumables and accessories
      • Ambient conditions
      • Space required
    • 2.4 Setting up your laser printer
      • Setting up paper feed tray 1
      • Connecting the power cable
      • Switching the printer on and off
        • Printing out the configuration page
        • Connecting the printer to a computer
  • 3 Installing the printer driver
    • 3.1 System requirements
    • 3.2 Notes on installing the printer driver
      • General information on the printer driver
      • Information on installation using "Add Printer"
    • 3.3 Installation for Windows 95/98 and NT 4.0
      • CD-ROM installation
      • Plug-&-Play installation (Windows 95/98 only)
    • 3.4 Installation for Windows 3.1x
    • 3.5 Uninstalling the Windows printer driver
    • 3.6 Installation for MS-DOS
  • 4 Working with the Windows printer drivers
    • 4.1 Displaying printer driver settings
      • Displaying settings in Windows 95/98
      • Displaying settings in Windows NT 4.0
      • Displaying the settings in Windows 3.1x
    • 4.2 Paper index card
      • Selecting a paper format
        • Creating a custom paper format
        • Adjusting the print-out to fit the paper
      • Specifying the orientation of the print paper
      • Specifying the paper source
      • Defining the type of paper/media
      • Scaling the printed document
      • Specifying the number of copies
      • Switching on/off the printer’s sorting function
    • 4.3 Page layout index card
      • Printing multiple document pages per print page (N-up)
      • Printing watermarks
        • Custom watermarks
      • Adjusting the printable area (XY image shift)
    • 4.4 Quality index card
      • Switching Toner Save function on and off
      • Optimizing the print quality of text and graphics
      • Specifying the toner density
      • Optimizing data exchange with the printer (All raster)
      • Specifying the resolution
      • Activating the use of printer-resident TrueType fonts
    • 4.5 Device option index card
      • Activating the optional paper feed tray 2
      • Specifying the total memory capacity
  • 5 Working with the Windows printer tools
    • 5.1 Calling up the Status Monitor
      • Calling up the Status Monitor in Windows 95/98, Windows NT 4.0
      • Calling up the Status Monitor in Windows 3.1x
      • Altering the size of the Status Monitor window
    • 5.2 Calling up the Control Panel
    • 5.3 Paper index card
      • Defining the response in the case of a lack of suitable paper
      • Specifying a paper format for paper feed tray 1
    • 5.4 Printer setting index card
      • Switching on/off the Power Save mode
      • Switching on/off the automatic continuation function
      • Specifying fast or normal printing modes
      • Specifying the input/output timeout
      • Switching on/off the paper format error detection
      • Activating page protection
    • 5.5 Test print index card
      • The various test prints
        • Printing out a test print
    • 5.6 Counter index card
      • Checking the status of a counter
        • Resetting a counter
    • 5.7 Configuration index card
  • 6 Working with the DOS printer tools
    • 6.1 Using the Status Monitor
      • Calling up the Status Monitor
      • Switching on/off popup messages (Setup menu)
        • Changing the hotkey command for the Status Monitor (Setup menu)
        • Defining popup messages (Setup menu)
    • 6.2 Using the DOS Control Panel
      • Calling up the Control Panel
      • Creating and saving printer profiles
      • Loading printer profiles
      • Printing a test or demo page
      • Changing the printer port
    • 6.3 Setup panel
      • Selecting a paper format
      • Specifying the paper source
        • Specifying fast or normal printing modes
      • Specifying the number of lines printed per page
      • Specifying the number of copies
      • Specifying the orientation of the printing paper
        • Defining the response to format errors
        • Specifying a paper format for paper feed tray 1
    • 6.4 Font panel
    • 6.5 Output Quality panel
      • Switching Toner Save function on and off
      • Specifying the resolution
      • Optimizing the print quality of text and graphics
      • Specifying the toner density
    • 6.6 Counter panel
      • Checking the status of a counter
        • Resetting a counter
    • 6.7 Configuration panel
    • 6.8 Other panel
      • Switching on/off the Power Save mode
      • Switching on/off the paper format error detection
      • Activating page protection
      • Switching on/off the automatic continuation function
      • Specifying the input/output timeout
  • 7 Working with the printer
    • 7.1 Please note the following points:
      • What should I watch out for when loading paper?
      • What should I watch out for when loading envelopes?
      • Which sizes of paper can I use?
      • What types of paper can I use?
      • Printable area
    • 7.2 Using the control button
      • Resetting the counter for the toner cartridge
      • Resetting the counter for the image transfer roller
      • Cancelling a print job
      • Printing out the configuration page
      • Continuing a print job after an error message
    • 7.3 Loading paper
      • Loading paper into paper feed tray 1
      • Loading paper into the manual feed unit
      • Loading paper into paper feed tray 2
    • 7.4 Determining the direction of the print-out
    • 7.5 Monitoring print jobs with the Status Monitor
    • 7.6 Cancelling a print job
  • 8 Installing optional accessories
    • 8.1 Installing paper feed tray 2
    • 8.2 Installing the face-up output tray
    • 8.3 Installing the DIMM memory module
  • 9 Caring for and maintaining your printer
    • 9.1 Cleaning the printer
      • Cleaning the case
      • Cleaning the paper feed roller
    • 9.2 Replacing the toner cartridge
    • 9.3 Replacing the image transfer roller
  • 10 Troubleshooting
    • 10.1 Clearing paper misfeeds
      • Clearing a paper misfeed at the image transfer roller
      • Clearing a paper misfeed at the fusing unit
      • Clearing a paper misfeed at the output tray
      • Clearing a paper misfeed at paper feed tray 1
      • Clearing a paper misfeed at the manual feed unit
      • Clearing a paper misfeed at paper feed tray 2 (optional)
    • 10.2 Problems with print quality
    • 10.3 General print problems
    • 10.4 Printer messages
      • Indicator lamp functions
      • Status messages
      • User messages
      • Service messages
  • 11 Appendix
    • 11.1 Features
      • Hardware
      • Software
      • Operating System
    • 11.2 Technical specification
      • Laser Printer 200 Series
      • Second Paper Cassette tray (option)
      • Expansion Memory (SDRAM-DIMM) (option)
      • Interface connector and Cable
    • 11.3 CE symbol (Declaration of Conformity)
    • 11.4 Index