TA Triumph-Adler DC 2325 - Manual (Page 116)

FAX Operation (Advanced)
4-50 OPERATION GUIDE
Sub Address Communication
Sub Address Communication
Sub address communication is communication in which data is sent and
received with sub addresses and passwords attached in conformance with
the ITU-T (International Telecommunication Union) recommendations.
Sub addresses enable communication modes with third-party machines
that were previously only possible between our brand machines. These
include confidential delivery (sending originals to an original delivery box
set up in the receiving system) and polling communication (reception of
documents from a source machine that is controlled from the receiving
machine). Using sub address communication and the memory forwarding
function on this machine also allows advanced communication functions
such as storing received originals in FAX Boxes and forwarding originals
to other fax machines.
NOTE: In order to conduct sub address communication, the other party’s
system also needs to be equipped with sub address communication
functions of the same type.
Sub address-based communication can be used together with various kind
of functional communication. When registering a sub address and sub
address password in the Address Book and One-touch keys, you can omit
their entry before transmission. For details, refer to the explanations in the
procedure of each communication method and registration method.
Sub Address
With the machine, sub address and sub address passwords are called sub
address.
Sub Address
Use the numbers from 0 to 9, ‘ (space)’, and ‘#’ and ‘*’ characters to enter
a sub address of up to 20 digits. When the machine receives originals, the
sub address is used as the forward requirement for memory forwarding.
Sub Address Password
Use the numbers from 0 to 9, ‘ (space)’, and ‘#’ and ‘*’ characters to enter
a sub address password of up to 20 digits. When the machine receives
originals, a sub address password is not used.
Sub Address Transmission
To use sub address transmission, follow the steps below.
NOTE: To use sub address transmission, check that a sub address and
password have been set in the receiving system in advance.