TA Triumph-Adler DC 2325 - Manual (Page 45)

FAX Operation (Basic)
OPERATION GUIDE 3-13
3
Cancelling Communication
The method for cancelling communication with this machine differs
depending on the transmission method (memory transmission or direct
transmission) and communication form. Methods of cancelling in various
cases are explained here.
Cancelling Memory Transmission (while originals are being scanned)
During memory
transmission, to
cancel scanning
while originals are
being scanned,
press the Stop key
on the operation
panel, or press
[Cancel] on the touch
panel. Scanning of
originals is canceled,
and the originals are
ejected. When
originals remain in
the document
processor, take them
out from the original
output table.
Cancelling Memory Transmission (during communication)
During memory transmission, to cancel communication after it has started
following the completed scanning of originals, use the following procedure.
NOTE: You can cancel transmission by disconnecting the telephone line.
For details, refer to Cancelling Transmission (Disconnection of
Communication) on page 3-15.
1 Press the Status/
Job Cancel key.
2 Press [Sending Jobs].
30/40/50 ppm model 25 ppm model
30/40/50 ppm model 25 ppm model