TA Triumph-Adler DC 2325 - Manual (Page 92)

FAX Operation (Advanced)
4-26 OPERATION GUIDE
File Format Setting
If you are sending the file as an E-mail attachment or transferring it to a
folder (SMB or FTP), select PDF or TIFF as the file format.
1 Follow steps 1 to 4 of Registration of Forwarding Settings (Forward All) on
page 4-18.
2 Press [Change] of File Format.
3 Press [PDF] or [TIFF], and then [OK].
4 Press [OK].
5 Press [OK].
6 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
File Separation Setting
If you are sending the file as an E-mail attachment or transferring it to a
folder (SMB or FTP), you can choose whether the pages are separated.
1 Follow steps 1 to 4 of Registration of Forwarding Settings (Forward All) on
page 4-18.
2 Press [Change] of File Separation.
3 Press [Off] or [Each Page], and then [OK].
4 Press [OK].
5 Press [OK].
6 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Print Setting
You can set whether the machine should print received originals when
forwarding them. You can select either 1 or 2 as the number of copies.
1 Follow steps 1 to 3 of Registration of Forwarding Settings (Forward All) on
page 4-18.
2 Press [Change] of Print.
3 Press [On] or [Off].
If you selected [On], press [+] or [-] to set the number of copies.