TA Triumph-Adler DC 2325 - Manual (Page 93)

FAX Operation (Advanced)
OPERATION GUIDE 4-27
4
4 Press [OK].
5 Press [OK].
6 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
File Name Registration
You can set the file name to be created when forwarding. You can append
information such as the date/time and the job number or fax number
(address for an i-FAX).
1 Follow steps 1 to 3 of Registration of Forwarding Settings (Forward All) on
page 4-18.
2 Press [T].
3 Press [Change] of File Name.
4 Press [File Name].
5 Enter the file name and press [OK].
6 To insert additional information into the file name, press [Job No.], [Date
and Time], [Add FAX No. to Front] or [Add FAX No. to Back].
NOTE: For details on character entry, refer to Character Entry Method on
page 2 of the Appendix.
Please note that when you have not add any additional information, file
names become the same, and, therefore, old files are overwritten when
received originals are forwarded with folder (SMB) transmission and folder
(FTP) transmission.
7 Press [OK].
8 Press [OK].
9 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Settings for Memory Forwarding from COMMAND CENTER (RX/Forward
Requirements Settings)
You can use COMMAND CENTER on a computer connected to the
network to specify the memory forwarding settings on this machine.
Refer to the machine’s Operation Guide for information on the network
settings.