TA Triumph-Adler DC 2325 - Manual (Page 79)

FAX Operation (Advanced)
OPERATION GUIDE 4-13
4
1 Press the
Status/Job
Cancel key.
2 Press [Device/
Communication],
and then
[Manual RX].
Reception will
start.
NOTE: When using a telephone set that can send tone signals, use the
telephone to start the reception of originals with the remote switch
function. (Refer to Remote Switch Function on page 4-14.)
When you hear a voice from the receiving system
The telephone line has connected to the telephone of the sending system.
When the conversation is over, follow steps 1 to 2 above.
After the sending system has started transmission, the machine starts
receiving originals.
4 When reception starts (when the Receive indicator on the operation panel
starts blinking), return the handset to its original position.
30/40/50 ppm model 25 ppm model
Status
Status
Ready .
Device/
Communication
Paper /Supplies
10/10/2007 10:00
Scanner
Ready .
Printer
Not connected.
Removable Memory
Hard Disk
Not connected.
Memory Card
Storing Jobs Sending Jobs Printing Jobs
Format Remove
Line Off Manual RX
FAX Line 1
Log
Format Printing list
FAX
Ready .
Check New FAX FAX/i-FAX