TA Triumph-Adler DC 2325 - Manual (Page 163)

Setup and Registration
OPERATION GUIDE 6-11
6
Reception Date/Time
Reception Date/Time function adds the reception date/time, sender
information and number of pages on the top of each page when the
message is printed out. It is useful for confirming the time of reception if the
fax is from a different time zone.
NOTE: When the received data is printed on multiple pages, the
reception date/time is printed on the fist page only. It is not printed on the
pages that follow.
When the received fax data is forwarded after retrieving it from memory,
the reception date/time is not added to the forwarded data.
1 Press the System Menu key.
2 Press [FAX/i-FAX], [Next] of Reception, [Next] of Basic and then [Change]
of Reception Date/Time.
3 Press [On].
4 Press [OK].
5 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Status
FAX - Reception Date/Time
Add a reception date/time to faxes before printing.
Cancel OK
10/10/2007 10:00
On Off