TA Triumph-Adler DC 2325 - Manual (Page 197)

Internet Faxing (i-FAX)
OPERATION GUIDE 8-7
8
The settings available on the i-FAX SMTP page are shown below.
After completing the settings, click Submit to save the settings.
Item Description
Use i-FAX Server If this option is set to Off, use the SMTP server settings for E-mail
transmission. To specify separate settings for i-FAX transmission, select On in
this setting and register the SMTP server.
SMTP Port Number Set the port number used by SMTP. Normally, 25 is used.
SMTP Server Name Enter the SMTP server name or SMTP server IP address. You can enter up to
62 characters.
If you enter the server name, you must specify the IP address of the DNS
server. You can enter the DNS server IP address in the TCP/IP settings
screen. Refer to the machine’s Operation Guide for details.
SMTP Server Timeout Enter the timeout period in seconds.
Authentication Protocol Specify whether SMTP authentication will be used or whether POP before
SMTP will be used. This SMTP authentication is compatible with Microsoft
Exchange 2000.
Authenticate as Specify the i-FAX user POP3 account or specify another account and the user
who will provide authentication.
Login User Name If you selected Other in the user setting, enter the user name used for
authentication. You can enter up to 62 characters.
Login Password If you selected Other in the user setting, enter the login user password used
for authentication. You can enter up to 62 characters.
POP before SMTP
Timeout
If you selected POP before SMTP in the authentication setting, specify the
timeout period in seconds.
Test Runs a test to determine whether the settings specified in this page are
correct.
E-mail Size Limit Enter the maximum size for E-mails that can be sent in kilobytes. Entering 0
disables this setting.
Sender Address Displays the address registered as the E-mail address in the i-FAX POP3
settings.
Signature Displays a text format signature that is inserted at the end of each E-mail
message. To change the signature, go to Advanced > E-mail > SMTP >
General and edit the signature.