TA Triumph-Adler DC 2325 - Manual (Page 38)

FAX Operation (Basic)
3-6 OPERATION GUIDE
3 If necessary,
make any
detailed
settings. Press
each key to
change the
setting, and
press [OK].
[On Hook]
Press this key to connect to the telephone line.
When the FAX number has been entered, the machine starts dialing to the
receiving system.
After pressing this key, you can dial the number of the receiving system
using the numeric keys. For details, refer to Manual Send on page 4-11.
Dialing methods without using the numeric keys
• Using the Address Book (Refer to page 3-16.)
• Using One-touch keys (Refer to page 3-28.)
• Using the Speed Dial key (Refer to page 3-31.)
• Manual redial (recall) (Refer to page 3-32.)
Key Description
Sub Address To communicate using the sub address, press
this key. For details, refer to Sub Address
Communication on page 4-50.
Transmission Start
Speed To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM ECM (error correction mode) is a function to
automatically resend an image that has not
been correctly sent or received due to the
effects of noise on the telephone line during
transmission. To change the ECM
communication setting, press this key.
Encrypted
Transmission To send faxes using encryption, press this key.
For details, refer to Encryption on page 6-26.
Status 10/10/2007 10:00
Enter Destination.
Cancel OK Next Dest.
Ready to send.
Pause
FAX No. Entry
Destination
Sub Address
Transmission
Start Speed
ECM
Encrypted
Transmission
On Hook
Back Space Space
Add a new FAX destination.
Enter the FAX number with the numeric keys.
Add to Addr Book
0
01234567