TA Triumph-Adler DC 2325 - Manual (Page 122)

FAX Operation (Advanced)
4-56 OPERATION GUIDE
IMPORTANT:
• The recipient’s machine must also be equipped with the same sort of
sub address bulletin board communication function. Some fax
machines cannot store originals and some do not support polling
reception. Check both the sending and receiving machines
beforehand to ensure that they each have the required functionality.
(For example, even if you store an original in a Polling box on this
machine, you will not be able to establish successful communication if
the receiving fax machine has no polling reception function.)
• The sender must also provide the recipient with the sub address and
sub address password.
NOTE: For more information on sub addresses, refer to Sub Address
Communication on page 4-50.
For information on how to receive files using sub address bulletin board
communication, refer to Using Polling Reception with Sub Addresses on
page 4-60.
Deleting Originals After Polling Transmission
Originals intended for polling transmission are automatically deleted after
they have been sent to the destination. To allow polling transmission of the
same original to multiple destinations, set this option to [Off].
1 Press the System Menu key.
2 Press [Document Box/Removable Memory], [Next] of Polling Box and
[Change] of Delete Transmitted File.
3 Select either [Off] or
[On].
4 Press [OK].
5 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Using Polling Transmission
1 Place the originals.
Status
Document Box/Removable Memory - Delete File after Polling
Delete documents automatically by means of
polling TX.
Cancel OK
10/10/2007 10:00
On Off