TA Triumph-Adler DC 2325 - Manual (Page 165)

Setup and Registration
OPERATION GUIDE 6-13
6
MP Tray Paper Output
You can select whether to use the MP tray paper when printing out the
received fax.
1 Press the System Menu key.
2 Press [FAX/i-FAX], [Next] of Reception, [Next] of Basic and then [Change]
of Multi Purpose Tray.
3 Select either [Off]
(not to use) or [On]
(to use).
4 Press [OK].
5 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Status
FAX - Multi Purpose Tray
Allow faxes to print on paper from
multi-purpose tray.
Cancel OK
10/10/2007 10:00
Off On