TA Triumph-Adler DC 2325 - Manual (Page 175)

Setup and Registration
OPERATION GUIDE 6-23
6
2 Select the Permit ID
No. to be changed or
deleted.
To change Permit ID
No., go to step 3,
and to delete Permit
ID No., go to step 6.
3 Press [Detail].
4 Use [+]/[-] or the
numeric keys to
reenter Permit ID
No. (0000 to 9999)
NOTE: Press the Clear key to display the previous number.
5
Press [OK]. When the change confirmation screen appears, press [Yes].
Go to step 7.
6 Press [Delete]. When the deletion confirmation screen appears, press
[Yes].
7 To change and delete other Permit ID numbers, repeat step 2 to 6.
8 Press [Close].
9 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Setting Send Restriction
You can restrict the other parties to which you send originals only to the
ones registered in Permit FAX No. and Permit ID No. as well as the ones
registered in the Address Book. To change the sending restriction, follow
the steps below.
1 Press the System Menu key.
Status
FAX - Permit ID List
10/10/2007 10:00
FAX ID
Register an ID from which faxes will be accepted. (Up to 25 IDs can be registered.)
Add
Detail Delete
1/1
2222
Close
Status
FAX - Add
Add or edit a Permit ID for transmissions.
Use [-]/[+] or the numeric keys to enter a number.
Cancel OK
10/10/2007 10:00
(0000-9999 )
2222