TA Triumph-Adler DC 2325 - Manual (Page 29)

Preparation Before Use
OPERATION GUIDE 2-3
2
Selection of Transmit Terminal Identification (TTI)
The transmit terminal identification (TTI) is the information about the
machine (transmit terminal) to be printed out on the fax on the receiving
system. The information includes transmission date and time, the number
of transmission pages, and the fax number. This machine enables the user
to select if the TTI is printed out on the fax on the receiving system.
Regarding the location of the information to be printed, you can select
inside or outside of the page image being sent.
NOTE: You can specify a separate TTI for fax transmissions and Internet
fax transmissions.
Normally, the Local FAX Name is printed in the transmit terminal
identification (TTI). However, when job accounting has been enabled, and
you send originals after entering an Account ID, the Account Name is
printed.
1 Press the System Menu key.
2 Press [FAX/i-FAX], [Next] of Transmission, [Next] of FAX (Send Fax) or i-
FAX (Send i-FAX) and then press [Change] of TTI.
3 Press the location for
printing the
information on the
fax. If you don’t want
to print, press [Off].
4 Press [OK].
5 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Status
FAX - TTI
Attach TTI (Transmit Terminal Identification)
in transmitted documents.
Cancel OK
10/10/2007 10:00
Outside Inside Off