TA Triumph-Adler DC 2325 - Manual (Page 160)

Setup and Registration
6-8 OPERATION GUIDE
Volume Adjustment
Adjust the volume of the speaker and monitor.
Speaker Volume: Volume of the built-in speaker when the line is
connected by pressing [On Hook].
Monitor Volume: Volume of the built-in speaker when the line is
connected without pressing [On Hook] such as in memory transmission.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Sound and then [Change] of FAX
Speaker Volume or FAX Monitor Volume.
3 Select any of [1]
(Minimum), [2]
(Medium), [3]
(Maximum) or [0]
(Mute).
4 Press [OK].
5 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Status
Common Settings - FAX Speaker Volume
Set the FAX speaker volume level.
Cancel OK
Mute
10/10/2007 10:00
Minimum Medium Maximum
0 1 2 3