Amprobe – Amprobe Multitest-2000 Continuity-Tester User Manual
Page 104
Advertising
AMPROBE
MULTITEST2000
8.5.4. "WAVE"
mode
Selecting the WAVE mode the screen below will be displayed according to the settings
made as per paragraph 8.1. The screen shows the waveform of the current.
Example of screen
The symbols used are described in Tab. 2.
For eventual messages displayed see appendix 1 – MESSAGES DISPLAYED.
Following keys are enabled:
ESC:
to return back to METER mode (see paragraph 8.5.2).
SAVE:
to save in the instrument memory a record of “Smp” type (see
paragraph 9.2) containing the instantaneous values of voltage and
current present on the instrument inputs. This function is disabled
during a recording.
27.09.00 17:35:12
I1 = 230.2 A
Ipk1 = 325.5 A
freq = 50.0 Hz
Advertising