Amprobe – Amprobe Multitest-2000 Continuity-Tester User Manual
Page 62
Advertising
AMPROBE
MULTITEST2000
In1= 23°C
In1
PG+
5. Press this key to enable/disable the HOLD function (updating interruption of the
displayed data). When the HOLD function is enabled, the word
HOLD
is
displayed. This key is disabled during a recording. It's not possible to run a
recording if this function is enabled.
6. The displayed result can be stored by pressing the SAVE key twice (refer to
paragraph 9.1).
Advertising