Amprobe – Amprobe Multitest-2000 Continuity-Tester User Manual
Page 121
AMPROBE
MULTITEST2000
The chosen configuration is the following (defined for ANALYZER function)
ANALYZER CONFIG:
Frequency: 50Hz
Transforming ratio of voltmetric transformers:
1
Type of electrical equipment:
SINGLE
Clamp Type:
FLEX
Password: enabled
RECORDER CONFIG:
Start:
Manual (the recording is started
1 minute after pressing
the
START/STOP
key)
Stop: Manual
Integration period:
15min
Recording of harmonics:
ON
Recording of Voltage anomalies (voltage Sag and Surge) :
ON
Voltage Reference for Sag and Surge detection:
230V
Upper Limit for Sag and Surge detection:
6%
Lower Limit for Sag and Surge detection:
10%
Selected voltages:
V1
Selected voltage harmonics:
THD, 01, 03, 05, 07
Selected currents:
I1
Selected current harmonics:
THD, 01, 03, 05, 07
CO-GENERATION: OFF
Powers, Pf and cos
ϕ selected:
P1
Q1i
Q1c
S1
Pf1
dpf1
Energies: Ea1
Eri1
Erc1
If the user changed the instrument’s settings can quickly resume the above configuration
using the RESET option (see paragraph 5.5).