Amprobe Multitest-2000 Continuity-Tester - Manual (Page 40)

AMPROBE
MULTITEST2000
6.2.3. Results of "TMR" mode
M
Ω 05.06.01
Insulation Resistance
Voltage during the Test
Duration of the Test
Test mode
1.07
M
Ω
514V 15s
TMR 500V TIME:60s
FUNC VNOM
↓
At the end of the test if
the Insulation
resistance is lower
than R
MAX
(see Table2)
and the instrument
generated the
Nominal test Voltage,
the instrument emits a
double beep
indicating the positive
outcome of the test
and displays a screen
similar to the screen to
the right.
The displayed result can be stored by pressing the SAVE key twice (according to
paragraph 9.1).
M
Ω 05.06.01
Maximum resistance value
that can be measured
(999
Ω is displayed if a
rated voltage of 500V was
selected, see Table2).
If the Insulation
resistance is higher
than R
MAX
(see Table2),
the instrument emits a
double beep at the end
of the test indicating
> 999
M
Ω
The symbol ">" means that