Amprobe – Amprobe Multitest-2000 Continuity-Tester User Manual
Page 42
AMPROBE
MULTITEST2000
6.2.4. "MAN" and "TIMER" mode faulty cases
M
Ω 05.06.01
Disconnect the External
Power Supply Adapter
If the instrument
detects the External
Power supply adapter
the instrument will
show the message
displayed to the right.
-.- -
M
Ω
---V 15s
ν REMOVE POWER
MAN 500V
FUNC
VNOM
M
Ω 05.06.01
ATTENTION: the test can't be
executed. Check that the circuit is
not energized.
-.- -
M
Ω
---V 15s
ν VOLT IN INPUT
MAN 500V
FUNC
VNOM
If the instrument
detects a Voltage
between the input
terminals higher than
15V, the instrument
does not perform the
test and displays the
screen to the right for
5 seconds.
This result can't be saved