Amprobe Multitest-2000 Continuity-Tester - Manual (Page 30)

AMPROBE
MULTITEST2000
6.1.4. Results of "RT+" and "RT-" modes
LOW
Ω 05.06.01 Max Resistance value of
R+ or R-.
Test current
Duration of the Test
1.07Ω
219mA
RT+ 0.11
Ω TIME: 10s
FUNC CAL
↑ ↓
If a resistance value
RT+ or RT- lower than
5
Ω is detected, the
instrument emits a
double sound signal
indicating the positive
outcome of the test
displays a screen similar
to the screen to the
right.
Note:
We recommend the use of alligator clips and to assure the alligator clips make good
contact with the conductor under test. Indeed, in this test the instrument gives as a
final result the maximum measured value of R+ or R- and using test leads instead of
alligator clips could give you faulty results due to faulty contact between the test leads
and conductor under test
The displayed result can be stored by pressing the SAVE key twice (refer to
paragraph 9.1).