Amprobe Multitest-2000 Continuity-Tester - Manual (Page 58)

AMPROBE
MULTITEST2000
7. AUX: MEASUREMENT WITH EXTERNAL PROBES
Turn the rotary knob to the AUX position.
The F4 function key selects between the following functions:
Environmental Parameter & Leakage Current
(mA, °C, °F, RH%, m/s, mV, Lux)
Sound Level Measurement
The "Environmental Parameter & Leakage Current" mode allows the following operations:
Display in real time the values coming from external probes or clamps.
Memorize the values displayed (pressing SAVE key).
Record (pressing the START key after a proper setting) an Input signal
coming from an External Probe or clamp among the possibilities
illustrated above. It will be possible to analyze the recorded data
ONLY by downloading it to a PC.
Please observe the difference between memorize and record: the former means that the
instrument stores in its’ memory only the actual values displayed while the latter means
that you want to store the course of the input signals during a recording time.
The "Sound Level Measurement" mode allows the following operations:
Display, in real time, the values coming from the external probe of sound
pressure level (Type 1).
Calculates, at the end of measurement, the Equivalent Level of noise
LeqT