Amprobe – Amprobe Multitest-2000 Continuity-Tester User Manual
Page 129
Advertising
AMPROBE
MULTITEST2000
Smp: values
of
the
samples of voltage and current stored by pressing SAVE.
DATA SIZE:
dimensions of the data saved in the instrument memory.
REC TIME:
amount of memory available, calculated on the basis of the parameters
selected for recording, therefore the most complete one (expressed in the format
“days.hours”) to make recordings.
The maximum quantity of Rec + R&a + Smp which can be contained by the instrument is 35.
Following keys are enabled:
F1, F2:
(only if the quantity of Rec+R&a+Smp is higher than 7) to run over all the
recordings stored in the instrument memory.
F3:
to cancel the last recording effected.
F4:
to cancel all the recordings effected.
ESC:
to quit this mode
Advertising