Amprobe Multitest-2000 Continuity-Tester - Manual (Page 66)

AMPROBE
MULTITEST2000
STOP:MAN
The recording of all the selected parameters will be interrupted
manually by pressing START/STOP (see chapter 9). ☺
START:AUTO
STOP:AUTO
The recording of all the selected values will be started / interrupted
at the set dates and times. In order to start the recording the user
will have to press START/STOP to set the instrument in Stand-by
mode until the start date and time previously set (see chapter 7).
INT. PERIOD
The value of this parameter determines every how many seconds
the values of the selected parameters will be memorised (see
chapter 16.4.1). Available choices:
5sec,10sec,30sec,1min, 2min 5min, 10min, 15min, 30min, 60min.
15min
☺
For eventual messages displayed see appendix 1 – MESSAGES DISPLAYED.