Amprobe – Amprobe Multitest-2000 Continuity-Tester User Manual
Page 21
AMPROBE
MULTITEST2000
5.5. RESET
This option re-establishes the default settings of the instrument.
The default settings of the instrument consist of:
ANALYZER CONFIG:
Full scale of the clamps:
1000A
Transformer ratio:
1
Type of electrical equipment:
4 wires
Password: enabled
RECORDER CONFIG:
Start:
Manual (the recording is started
at 00 sec mark on clock after pressing
the
START/STOP
key)
Stop: Manual
Integration period:
15min
Recording of harmonics:
ON
Recording of Voltage anomalies (Sag and Surge:
ON
Voltage Reference for Sag and Surge detection:
230V
Upper Limit for Sag and Surge detection:
6%
Lower Limit for Sag and Surge detection:
10%
Selected voltages:
V1
Selected voltage harmonics:
THD, 01, 03, 05, 07
Selected currents:
I1
Selected current harmonics:
THD, 01, 03, 05, 07
CO-GENERATION: OFF
Powers, Pf and cos
ϕ selected:
P1
Q1i
Q1c
S1
Pf1
dpf1
Energies: Ea1
Eri1
Erc1